NATIONAL INSTRUMENTS NI-PCI-5911

La carte NI PCI-5911

La carte NATIONAL INSTRUMENTS NI-PCI-5911 est un numériseur souple avec haute vitesse et haute résolution ajustables. La résolution s’étend de 8 bits à 100 Méch./s à plus de 21 bits à 10 Kéch./s. Que vous analysiez le spectre, faisiez la saisie de transitoires, numérisiez des IF ou enregistriez des signaux, la carte PCI-5911 est une solution économique avec peu de distorsion et de bruit. De plus, parce qu’elle fonctionne sur un PC, le transfert des données est bien plus rapide que celui d’instruments classiques comparables. Cela se traduit par une prise de mesure plus rapide. Vous pouvez construire des systèmes de test, de mesure et d’acquisition de données à moindre coûts qui couvre un large éventail d’applications dans les tests de semi-conducteurs ou vidéo, de caractérisation de composantes et électroniques.

The NATIONAL INSTRUMENTS NI-PCI-5911  is a flexible digitizer with adjustable high speed and high resolution. The resolution ranges from 8 bits at 100 MS / s to over 21 bits at 10 MS / s. Whether you are analyzing the spectrum, capturing transients, digitizing IFs, or recording signals, the PCI-5911 card is a cost-effective solution with little distortion and noise. In addition, because it runs on a PC, data transfer is much faster than that of comparable conventional instruments. This results in faster measurement. You can build cost-effective test, measurement and data acquisition systems that cover a wide range of applications in semiconductor or video testing, component characterization and electronics.

NATIONAL INSTRUMENTS NI-PCI-5911

 

The NATIONAL INSTRUMENTS NI-PCI-5911 is more than a 100 MHz
digitizer. It is a flexible, high-speed, high-resolution digitizer with
variable speed and resolution. The resolution ranges from 8 bits at
100 MS/s to more than 21 bits at 10 kS/s. Whether you analyze
spectra, capture transients, digitize IFs, or record waveforms, the NI
PCI-5911 offers low distortion and low noise for a low cost. In
addition, because it is PCI-based, data transfers are faster than with
traditional instruments, which means faster measurements. With the
PCI-5911, you can build lower cost test, measurement, and data
acquisition systems spanning a wide variety of applications in
semiconductor test, video test, component characterization, and
electronic test.

 

PCI-5911 : Flexible Resolution Technology

The PCI-5911 uses a patented digital signal processing technique to
significantly increase the sample precision. The flexible resolution
technology consists of a specialized filter, a flash analog-to-digital
converter (ADC), a digital-to-analog converter (DAC), and a DSP for
decimation and linearization.

Acquisition System for NI PCI-5911

Signal acquisition is performed in one of two modes of operation –
conventional mode or flexible-resolution mode. In conventional
mode, the PCI-5911 functions as an 8-bit, 100 MHz digitizer with
100 MS/s real-time sample rates and 1 GS/s random interleaved
sampling (RIS) for repetitive signals. Conventional mode must be
used to digitize signals with bandwidths between 4 and 100 MHz.
When digitizing signals with bandwidths less than 4 MHz, you
can use flexible-resolution mode, a patented signal processing
technology, to extend the effective resolution beyond eight bits.

Trigger for The NI-PCI-5911

has three trigger sources – analog, digital, and
software control. An analog trigger is derived by comparing the
waveform to either one threshold or two thresholds forming a
hysteresis condition. Digital triggers come from either the RTSI
synchronization bus or from the external digital connectors. The
PCI-5911 uses the NI-TIO timing ASIC as its timing engine.
Multiple-Instrument Synchronization
The RTSI bus routes timing and trigger signals between two or
more PCI-5911 boards or other National Instruments PCI products.
Multiple-instrument synchronization includes triggering several
measurement devices with a signal from a single instrument and
the synchronizing of all the instruments to the same clock. This
results in more accurate measurements across multiple instruments.

 

La carte NI PCI-5911

La carte NATIONAL INSTRUMENTS NI-PCI-5911 est un numériseur souple avec haute vitesse et haute résolution ajustables. La résolution s’étend de 8 bits à 100 Méch./s à plus de 21 bits à 10 Kéch./s. Que vous analysiez le spectre, faisiez la saisie de transitoires, numérisiez des IF ou enregistriez des signaux, la carte PCI-5911 est une solution économique avec peu de distorsion et de bruit. De plus, parce qu’elle fonctionne sur un PC, le transfert des données est bien plus rapide que celui d’instruments classiques comparables. Cela se traduit par une prise de mesure plus rapide. Vous pouvez construire des systèmes de test, de mesure et d’acquisition de données à moindre coûts qui couvre un large éventail d’applications dans les tests de semi-conducteurs ou vidéo, de caractérisation de composantes et électroniques.

The NATIONAL INSTRUMENTS NI-PCI-5911  is a flexible digitizer with adjustable high speed and high resolution. The resolution ranges from 8 bits at 100 MS / s to over 21 bits at 10 MS / s. Whether you are analyzing the spectrum, capturing transients, digitizing IFs, or recording signals, the PCI-5911 card is a cost-effective solution with little distortion and noise. In addition, because it runs on a PC, data transfer is much faster than that of comparable conventional instruments. This results in faster measurement. You can build cost-effective test, measurement and data acquisition systems that cover a wide range of applications in semiconductor or video testing, component characterization and electronics.